How should I prepare my badge artwork?
Use the correct bleed template for your badge size. Keep important text or characters inside the safe design area, extend backgrounds to the bleed line, and use artwork at 300 dpi or higher.
Button Badge Supplies
Badge Making Supplies for DIY & Creative Projects
Simple refill parts for button makers: metal backs, pin components, blank shells, and clear films for crafts, events, gifts, school projects, and everyday creative ideas.
Product Support
Button Making Supplies Support
Livaedge helps makers use badge refill parts with confidence. Below are simple setup, assembly, troubleshooting, care, and storage notes for button badge supplies.
FAQ
Product Support FAQ
How do I print and cut the design?
Print at actual size with scaling turned off. Cut along the bleed line with a circle cutter on a cutting mat so the paper edge stays clean and even.
How do I use the button press?
Clean the metal parts first. Place the back, printed artwork, clear PET film, and top shell in the correct order, then press both sides firmly. Hold the handle down for about two seconds each time.
What should I check after assembly?
Check that the pin is secure, the film lies flat, the artwork is centered, and the badge edge is fully sealed with no lifting or gaps.
Troubleshooting common issues
If the image shifts, confirm the paper was cut to the right size. If the edge lifts, check component order and press again with steady force. If the film wrinkles, clean dust from the shell and film before pressing.
How should I store badge supplies?
Store unused parts in a dry, ventilated place away from sunlight, moisture, and sharp objects. Unopened supplies are best used within 12 months; opened supplies are best used within 3 months.
Email Support
Need help with badge supplies?
Please include badge size, component type, quantity, machine or die reference, and a brief description of the issue. For quality concerns such as burrs, size deviation, or loose pins, include clear photos.
About Us
Focused on Badge Consumables, Consistent Supply, and Clear Support
Livaedge provides practical button badge supplies for DIY makers, creative studios, event projects, craft shops, and online sellers. We keep the website intentionally simple so customers can quickly understand what the brand sells, how the products are used, and how to contact us for support.
What We Supply
Simple Badge Refill Components
Metal pin backs, blank shells, and clear protective films for common button badge sizes.
Common Refill Sizes
| Badge Size | Common Name | Typical Pack | Buyer Note |
|---|---|---|---|
| 25 mm | 1 inch | 100 / 500 / 1,000 pcs | Small pins, events, school projects |
| 32 mm | 1.25 inch | 100 / 500 / 1,000 pcs | Popular craft and retail refill size |
| 58 mm | 2.25 inch | 100 / 500 / 1,000 pcs | Large artwork, photos, promotional badges |
| 75 mm | 3 inch | Custom bulk cartons | Oversized badges and display projects |
Why Livaedge
Reliable Supplies for Creative Badge Making
Quality Control
Material checks, size verification, packaging inspection, and smooth assembly review.
Global Shipping
Export-ready packing for online sellers, craft supply stores, makers, and overseas customers.
OEM Support
Custom size matching, label stickers, packaging choices, and refill set combinations.
Contact Us
Start an Inquiry
Email: jojolei@sina.com
For product support, order questions, or badge supply replacement concerns, please contact us with your badge size, component type, quantity, and photos if available.